|
Opinions on Hughes Camshafts?
#147247
11/08/08 12:35 PM
11/08/08 12:35 PM
|
Joined: Jul 2006
Posts: 4,319 Puyallup, WA
StealthWedge67
OP
master
|
OP
master
Joined: Jul 2006
Posts: 4,319
Puyallup, WA
|
I've been planning a 451 or 470 build, and wantto go with a solid cam. Been figuring the Comp XS282S, Then looked at Hughes menu..... Man, I like what I see in the numbers! Anybody have experience with their #4248 or #4652? This is in a street / strip B Body with 3.91's and either a 3k or 35k converter.
Last edited by GEnsrud; 11/08/08 12:41 PM.
LemonWedge - Street heavy / Strip ready - 11.07 @ 120
|
|
|
Re: Opinions on Hughes Camshafts?
[Re: StealthWedge67]
#147248
11/08/08 12:56 PM
11/08/08 12:56 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
I have a small cam from them and it is awesome. A big improvement over my engle cam. Great guys to work with too, in my opinion. Mine is a 3832 I think, much older about 02 or 03 I put it in. I also have pushrods and a complete kit from them for my engine. I will use them again. Jeff
|
|
|
Re: Opinions on Hughes Camshafts?
#147249
11/08/08 01:08 PM
11/08/08 01:08 PM
|
Joined: Jan 2003
Posts: 25,200 Upper Midwest
MoparforLife
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 25,200
Upper Midwest
|
Quote:
I have a small cam from them and it is awesome. A big improvement over my engle cam. Great guys to work with too, in my opinion. Mine is a 3832 I think, much older about 02 or 03 I put it in. I also have pushrods and a complete kit from them for my engine. I will use them again.
Jeff
I agree wholeheartedly. Great guys to work with and I have nothing but good to say about their cams and heads. I have friends here that are running there stuff in their dirt cars too and are happy with what they have been doing.
|
|
|
Re: Opinions on Hughes Camshafts?
#147250
11/08/08 01:10 PM
11/08/08 01:10 PM
|
Joined: Jan 2003
Posts: 11,711 Portage,michigan
B3422W5
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 11,711
Portage,michigan
|
Quote:
I have a small cam from them and it is awesome. A big improvement over my engle cam. Great guys to work with too, in my opinion. Mine is a 3832 I think, much older about 02 or 03 I put it in. I also have pushrods and a complete kit from them for my engine. I will use them again.
Jeff
I think Engle did or does make Hughes cams for them
69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight 418 BPE factory replacement headed stroker, 565 lift solid cam Best so far, 10.40 @127 1/4 1.41 best 60 foot 6.60 at 103.90 1/8
|
|
|
Re: Opinions on Hughes Camshafts?
[Re: MoparforLife]
#147252
11/08/08 01:48 PM
11/08/08 01:48 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
It was one of hughes cams grinds not engle, The first cam I got from them was engle though.
|
|
|
Re: Opinions on Hughes Camshafts?
#147253
11/08/08 02:16 PM
11/08/08 02:16 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
ive got their older version of the 4652 cam in my 416 sb. its a 4550 on a 108 solid lifter. runs pretty darn good. ive got it idling at 1000 in neitral with 14" of vauum, down to 750 in gear with about 6". im still playing with it to try and tune the carbs a little better
|
|
|
|
|
|