How fast with RPM heads? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech How fast with RPM heads?

Print Thread

How fast with RPM heads? #1367806 01/11/13 08:56 AM 01/11/13 08:56 AM
Joined: Jan 2003 Posts: 25,993 United Socialist States of Ame... T tboomer OP Too Many Posts
tboomer OP Too Many Posts T Joined: Jan 2003 Posts: 25,993 United Socialist States of Ame...	There was a thread here a couple years back about how fast guys were going with the Eddy BB RPM heads. I can't seem to find it! So...Could you fellas post up what you have and how fast? Thanks!! Ted Need your rear end checked out? Contact Grizzly!!

Re: How fast with RPM heads? [Re: tboomer] #1367807 01/11/13 02:48 PM 01/11/13 02:48 PM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	Ted my brother has run 9.30's in his 68 Cuda you see here. Its a basic 451 eng with RPM heads as its nothing special. But the car only weighs 2600 lbs. Ron

Re: How fast with RPM heads? [Re: tboomer] #1367808 01/11/13 02:52 PM 01/11/13 02:52 PM
Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard... mopar65 master
mopar65 master Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard...	ted my old 65 plymouh ran a best of 10.56 at allmost 126 in the 1/4 with a set of them out of the box.my car was around 11.5-12.1 compression. its the car that 69chargermd now owns. he allmost has the car in the high nines with the same heads.at the time the 65 weighed 3460 with me in it. are you thinkg about putting a set of these haeds on your car? mopar65 3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727 10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come... ( SGT Miller) Proudly served 12 years in the US ARMY RESERVES support our troops

Re: How fast with RPM heads? [Re: tboomer] #1367809 01/11/13 02:55 PM 01/11/13 02:55 PM
Joined: Feb 2010 Posts: 1,377 Ohio Todd pro stock
Todd pro stock Joined: Feb 2010 Posts: 1,377 Ohio	Quote: There was a thread here a couple years back about how fast guys were going with the Eddy BB RPM heads. I can't seem to find it! So...Could you fellas post up what you have and how fast? Thanks!! Ted I did the same and didn't find it. Looking for some ideas on a cam . Made some phone calls and got it narrowed down.

Re: How fast with RPM heads? [Re: Todd] #1367810 01/11/13 03:14 PM 01/11/13 03:14 PM
Joined: Jan 2003 Posts: 25,993 United Socialist States of Ame... T tboomer OP Too Many Posts
tboomer OP Too Many Posts T Joined: Jan 2003 Posts: 25,993 United Socialist States of Ame...	No....I am not changing out for rpms..I am in too deep now. It was just a question out of curiosity.. Need your rear end checked out? Contact Grizzly!!

Re: How fast with RPM heads? [Re: tboomer] #1367811 01/11/13 05:22 PM 01/11/13 05:22 PM
Joined: May 2004 Posts: 3,210 robin hood country deaks master
deaks master Joined: May 2004 Posts: 3,210 robin hood country	Here's my junk Ted 440 RB, 5000 stall, 4.56 gear, footbraked. The rest is in my sig. Mick 69 Dart GTS 440 mopar .590 cam, Edelbrock heads, 3200# best et 6.45, 106.78, 10.14, 132.88 mph, 1.47 60ft best 60ft 1.36

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1