Indy head bent exhaust valve - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Indy head bent exhaust valve

Print Thread

Page 1 of 2

1

2

Indy head bent exhaust valve #1337845 11/19/12 03:46 PM 11/19/12 03:46 PM
Joined: Jun 2004 Posts: 6,780 Alabama Mopar-Al OP master
Mopar-Al OP master Joined: Jun 2004 Posts: 6,780 Alabama	I got a bent valve on my 440-1 cast iron heads. so I call Indy and try to buy one. They answer right away, then tell me I have to buy a 40 buck minimum. So where would I buy 1 stock exhaust valve at? Does indy use Manely? I wanted to order today. thanks

Re: Indy head bent exhaust valve [Re: Mopar-Al] #1337846 11/19/12 03:50 PM 11/19/12 03:50 PM
A Anonymous Unregistered
Anonymous Unregistered A	Todd at Marsh Performance a sponsor here Moparts Connection will treat you like a real customer and ship you a valve right away

Re: Indy head bent exhaust valve [Re: Mopar-Al] #1337847 11/19/12 03:53 PM 11/19/12 03:53 PM
Joined: Jan 2003 Posts: 5,875 communist bloc of new jersey J jamesc master
jamesc master J Joined: Jan 2003 Posts: 5,875 communist bloc of new jersey	1st why is it bent? 2nd look at the stem any ID? 3rd there are plenty of vendors that would sell a single including some board sponsors, you will need dimensions manley, ferrea and others would have a valve for that but getting it immediately might be an issue

Re: Indy head bent exhaust valve [Re: ] #1337848 11/19/12 03:58 PM 11/19/12 03:58 PM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	Just buy the valve size.11/32 stem,1.810 head,5.370 length.Manley and others make that valve. I have a lot of good used ones if thats your size,you can have. [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Re: Indy head bent exhaust valve [Re: jamesc] #1337849 11/19/12 04:03 PM 11/19/12 04:03 PM
Joined: Jun 2004 Posts: 6,780 Alabama Mopar-Al OP master
Mopar-Al OP master Joined: Jun 2004 Posts: 6,780 Alabama	I knocked the head over .03445 thick or there abouts= Stock 11/32 ? 1.815 5.3850 long = stock or there abouts. If someone could PM me a Number, I will get this done. Thanks for the help. The head tipped into the other head right on the valve. They were all good before that. Now I have to surface the heads to.

Re: Indy head bent exhaust valve [Re: B G Racing] #1337850 11/19/12 04:04 PM 11/19/12 04:04 PM
Joined: Aug 2004 Posts: 2,128 sweden S sshemi top fuel
sshemi top fuel S Joined: Aug 2004 Posts: 2,128 sweden	I was in the same situation with my indy/rhs heads they told me a minimum of 40 bucks so i just ordered 3 valves. For my heads they where the only choice snce apperently they make them themself or atleast designe them and have them made. No other valve brand had what i needed.

Re: Indy head bent exhaust valve [Re: B G Racing] #1337851 11/19/12 04:13 PM 11/19/12 04:13 PM
Joined: Jun 2004 Posts: 6,780 Alabama Mopar-Al OP master
Mopar-Al OP master Joined: Jun 2004 Posts: 6,780 Alabama	Quote: Just buy the valve size.11/32 stem,1.810 head,5.370 length.Manley and others make that valve. I have a lot of good used ones if thats your size,you can have. PM sent

Re: Indy head bent exhaust valve [Re: sshemi] #1337852 11/19/12 04:14 PM 11/19/12 04:14 PM
Joined: Jan 2003 Posts: 5,875 communist bloc of new jersey J jamesc master
jamesc master J Joined: Jan 2003 Posts: 5,875 communist bloc of new jersey	manley lists two different exhaust valves for that application racemaster valve 11381-1 severe duty valve 11813-1 ferrea list a couple different ones as well F1885P check their websites or just have Bob give you one

Re: Indy head bent exhaust valve [Re: jamesc] #1337853 11/19/12 07:38 PM 11/19/12 07:38 PM
Joined: Oct 2006 Posts: 4,590 Indy J joshking440 Lunch is on me!
joshking440 Lunch is on me! J Joined: Oct 2006 Posts: 4,590 Indy	Alyerpal, I will PM you, but I can drive over to indy, buy the part and ship it to you tomorrow mornin

Re: Indy head bent exhaust valve [Re: joshking440] #1337854 11/19/12 08:28 PM 11/19/12 08:28 PM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	Quote: Alyerpal, I will PM you, but I can drive over to indy, buy the part and ship it to you tomorrow mornin Josh,have you started working at Indy yet? [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Re: Indy head bent exhaust valve [Re: B G Racing] #1337855 11/19/12 08:48 PM 11/19/12 08:48 PM
Joined: Oct 2006 Posts: 4,590 Indy J joshking440 Lunch is on me!
joshking440 Lunch is on me! J Joined: Oct 2006 Posts: 4,590 Indy	What are you talkin about bob?

Re: Indy head bent exhaust valve [Re: joshking440] #1337856 11/19/12 08:52 PM 11/19/12 08:52 PM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	Heard a rumor you were going to work for Indy. [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Re: Indy head bent exhaust valve [Re: B G Racing] #1337857 11/19/12 09:11 PM 11/19/12 09:11 PM
Joined: Jun 2004 Posts: 6,780 Alabama Mopar-Al OP master
Mopar-Al OP master Joined: Jun 2004 Posts: 6,780 Alabama	Thanks for the offer Josh, Bob mailed me one. I do want to add that , Every time I call Indy, they have answered the phone and no hold. I was not happy about a 40 dollar min charge, but they were ready to sell and ship to me. I called them acting like a regular customer and didn't give them my business name or tell them about the 10's of thousands I have bought from them already. It may not have mattered anyways, I just wanted to see how they dealt with a regular call in type customer.

Re: Indy head bent exhaust valve [Re: Mopar-Al] #1337858 11/19/12 09:13 PM 11/19/12 09:13 PM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	Quote: Thanks for the offer Josh, Bob mailed me one. I do want to add that , Every time I call Indy, they have answered the phone and no hold. I was not happy about a 40 dollar min charge, but they were ready to sell and ship to me. I called them acting like a regular customer and didn't give them my business name or tell them about the 10's of thousands I have bought from them already. It may not have mattered anyways, I just wanted to see how they dealt with a regular call in type customer. How do you like how we deal with racers? I'am going to have a good time with their new guy at Indy. Last edited by B G Racing; 11/19/12 09:15 PM. [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Re: Indy head bent exhaust valve [Re: B G Racing] #1337859 11/19/12 09:25 PM 11/19/12 09:25 PM
Joined: Jun 2004 Posts: 6,780 Alabama Mopar-Al OP master
Mopar-Al OP master Joined: Jun 2004 Posts: 6,780 Alabama	Quote: Quote: Thanks for the offer Josh, Bob mailed me one. I do want to add that , Every time I call Indy, they have answered the phone and no hold. I was not happy about a 40 dollar min charge, but they were ready to sell and ship to me. I called them acting like a regular customer and didn't give them my business name or tell them about the 10's of thousands I have bought from them already. It may not have mattered anyways, I just wanted to see how they dealt with a regular call in type customer. How do you like how we deal with racers? Top notch , So now, I will be needing a bottom end for this mega block. Should we have chatted longer? I have an appointment with a heart doc tomorrow, but I'm thinking 512,528, 540. I want to do the first bore 4.375 or under. I plan on a KB block after this. Bob, for shipping me those valves, I have a set of 69 charger hemi headers just laying around, can you use them? They're yours if you can. 1 pipe was altered after they were installed in a cuda with an aftermarket front end. I saved the old tube piece, they work both ways.

Re: Indy head bent exhaust valve [Re: B G Racing] #1337860 11/19/12 10:11 PM 11/19/12 10:11 PM
Joined: Apr 2003 Posts: 1,627 anywhere@ anytime A actionange top fuel
actionange top fuel A Joined: Apr 2003 Posts: 1,627 anywhere@ anytime	Quote: Quote: Thanks for the offer Josh, Bob mailed me one. I do want to add that , Every time I call Indy, they have answered the phone and no hold. I was not happy about a 40 dollar min charge, but they were ready to sell and ship to me. I called them acting like a regular customer and didn't give them my business name or tell them about the 10's of thousands I have bought from them already. It may not have mattered anyways, I just wanted to see how they dealt with a regular call in type customer. How do you like how we deal with racers? I'am going to have a good time with their new guy at Indy. So Bob, Joey wants to know what he can get for some of that "Special Chicken"? LOL

Re: Indy head bent exhaust valve [Re: B G Racing] #1337861 11/20/12 09:02 AM 11/20/12 09:02 AM
Joined: Oct 2006 Posts: 4,590 Indy J joshking440 Lunch is on me!
joshking440 Lunch is on me! J Joined: Oct 2006 Posts: 4,590 Indy	Quote: Heard a rumor you were going to work for Indy. Just helping a fellow racer...

Re: Indy head bent exhaust valve [Re: actionange] #1337862 11/20/12 09:16 AM 11/20/12 09:16 AM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	Quote: Quote: Quote: Thanks for the offer Josh, Bob mailed me one. I do want to add that , Every time I call Indy, they have answered the phone and no hold. I was not happy about a 40 dollar min charge, but they were ready to sell and ship to me. I called them acting like a regular customer and didn't give them my business name or tell them about the 10's of thousands I have bought from them already. It may not have mattered anyways, I just wanted to see how they dealt with a regular call in type customer. How do you like how we deal with racers? I'am going to have a good time with their new guy at Indy. So Bob, Joey wants to know what he can get for some of that "Special Chicken"? LOL Ange,we always appreciate you and Joeys hospitality at the Beaver race.Joey's chicken and steak is second to none.If we can ever help you guys in any way just call. [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Re: Indy head bent exhaust valve [Re: B G Racing] #1337863 11/21/12 12:31 PM 11/21/12 12:31 PM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	By the way everyone,Josh King is a Poopy Head and I hope he chokes on the anal parts of his Turkey Day bird. [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Re: Indy head bent exhaust valve [Re: B G Racing] #1337864 11/21/12 02:14 PM 11/21/12 02:14 PM
Joined: Oct 2006 Posts: 4,590 Indy J joshking440 Lunch is on me!
joshking440 Lunch is on me! J Joined: Oct 2006 Posts: 4,590 Indy	That would be a better death than chokin on the wool from the back of a sheep........ Last edited by joshking440; 11/21/12 02:17 PM.

Re: Indy head bent exhaust valve [Re: joshking440] #1337865 11/21/12 03:02 PM 11/21/12 03:02 PM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	I wear a mask over my mouth,you should try it.I told you you would choke on the wool,but no you wouldn't belive me.I here you choke on butt fuzz and pubic hair.This is a topic for your site,I don't think you really want me over there,do you? We have to constantly try and teach you youngster but like your whole new generation you have to learn the hard way. I hope Boomer changes your title to Poopyhead.Make sure you don't choke on those turkey parts and fall face down in your gravey and mash taters. Happy Turkey Day Josh [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Re: Indy head bent exhaust valve [Re: B G Racing] #1337866 11/21/12 04:07 PM 11/21/12 04:07 PM
Joined: Oct 2006 Posts: 4,590 Indy J joshking440 Lunch is on me!
joshking440 Lunch is on me! J Joined: Oct 2006 Posts: 4,590 Indy	ill meet you over at my site.....we can discuss this further..... touche BG.....Touche

Re: Indy head bent exhaust valve [Re: joshking440] #1337867 11/21/12 05:46 PM 11/21/12 05:46 PM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	Quote: ill meet you over at my site.....we can discuss this further..... touche BG.....Touche Umum,I like the way you talk,umum.Some call it a Keyser blade,I call it a sling blade.I suppose I'll have me some of those french fried taters now.How do you call the police?Just dial 911 [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Re: Indy head bent exhaust valve [Re: B G Racing] #1337868 11/21/12 06:50 PM 11/21/12 06:50 PM
Joined: Jul 2005 Posts: 1,162 s e mich ro23car super stock
ro23car super stock Joined: Jul 2005 Posts: 1,162 s e mich	Quote: Quote: ill meet you over at my site.....we can discuss this further..... touche BG.....Touche Umum,I like the way you talk,umum.Some call it a Keyser blade,I call it a sling blade.I suppose I'll have me some of those french fried taters now.How do you call the police?Just dial 911 looks like you have anger issues or you dont like thanksgiving.

Re: Indy head bent exhaust valve [Re: ro23car] #1337869 11/21/12 07:15 PM 11/21/12 07:15 PM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	Quote: Quote: Quote: ill meet you over at my site.....we can discuss this further..... touche BG.....Touche Umum,I like the way you talk,umum.Some call it a Keyser blade,I call it a sling blade.I suppose I'll have me some of those french fried taters now.How do you call the police?Just dial 911 looks like you have anger issues or you dont like thanksgiving. Bill,I have both,and Josh is trying to set me up.He wants to ambush me on Fast Mopar,but I'am old enough to remember Custer's last stand and General Custer asked his second in command"where did all them fricken indians come from".Seriously everyone knows Josh and I are really good friends, I think [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Re: Indy head bent exhaust valve [Re: B G Racing] #1337870 11/21/12 07:35 PM 11/21/12 07:35 PM
Joined: Oct 2006 Posts: 4,590 Indy J joshking440 Lunch is on me!
joshking440 Lunch is on me! J Joined: Oct 2006 Posts: 4,590 Indy	What are you talkin about bbbaaahhhhhhhbbbb George. I wouldn't ambush you.

Re: Indy head bent exhaust valve [Re: joshking440] #1337871 11/21/12 07:42 PM 11/21/12 07:42 PM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	Quote: What are you talkin about bbbaaahhhhhhhbbbb George. I wouldn't ambush you. Totally uncalled for,you cut deep Josh [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Page 1 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1