Re: Stock 360 magnum, on spray, anyone done this??
[Re: Blown61]
#1291906
08/26/12 11:34 PM
08/26/12 11:34 PM
|
Joined: Aug 2003
Posts: 4,673 On the parachute mount
n20mstr
master
|
master
Joined: Aug 2003
Posts: 4,673
On the parachute mount
|
the most we have put to it is 65n 60f and it went 11.15 @ 119
currently as of yesterday it went 11.54 @ 115 with 47n 42f
We have decreased the nitrous as we have tuned the suspension and trying to keep it at 11.50-11.40's since we are running 11.50 index with it.
It is a 360 magnum all we did was change the oil pan, cam, springs and intake. The heads have never been off it, ANy other questions fire away....
....BAD A$$ STREET CAR.....
|
|
|
Re: Stock 360 magnum, on spray, anyone done this??
[Re: Blown61]
#1291908
08/27/12 12:07 PM
08/27/12 12:07 PM
|
Joined: Aug 2003
Posts: 4,673 On the parachute mount
n20mstr
master
|
master
Joined: Aug 2003
Posts: 4,673
On the parachute mount
|
CAM WE got from Scott Brown, not sure on the specs but it is in there with NO piston notching, just slid it in . Intake is Edelbrock for the magnum engine Carb is a 650
HP of nitrous? 65 jet i would say 150+ 47 jet i would say 90-100 ?
we use a -9 ngk and i have been running the timing at 28-25 on nitrous depending on jetting and if we want to slow the car down sometimes i am taking out another 2, or 3 degrees to get it at 11.50
SO far this season all of these runs have been in 1900 to 2200 da
....BAD A$$ STREET CAR.....
|
|
|
Re: Stock 360 magnum, on spray, anyone done this??
[Re: n20mstr]
#1291909
08/27/12 06:22 PM
08/27/12 06:22 PM
|
Joined: Feb 2003
Posts: 1,572 wisconSIN
Blown61
OP
pro stock
|
OP
pro stock
Joined: Feb 2003
Posts: 1,572
wisconSIN
|
|
|
|
Re: Stock 360 magnum, on spray, anyone done this??
[Re: Blown61]
#1291910
08/28/12 01:39 AM
08/28/12 01:39 AM
|
Joined: Feb 2004
Posts: 4,501 Gainesville,FL
goldmember
master
|
master
Joined: Feb 2004
Posts: 4,501
Gainesville,FL
|
Yes it has. Stock 1996 360magnum,dragged from a salvage yard in 2000,installed in my daily driver for many years(3500+lbs),even towed cars(700miles) with it. Then a few mods and a little N2O(150shot) and high 10's @ 123mph for the last 4 yrs .
Last edited by goldmember; 08/28/12 01:40 AM.
|
|
|
Re: Stock 360 magnum, on spray, anyone done this??
[Re: goldmember]
#1291911
08/28/12 07:07 PM
08/28/12 07:07 PM
|
Joined: Feb 2003
Posts: 1,572 wisconSIN
Blown61
OP
pro stock
|
OP
pro stock
Joined: Feb 2003
Posts: 1,572
wisconSIN
|
Quote:
Yes it has. Stock 1996 360magnum,dragged from a salvage yard in 2000,installed in my daily driver for many years(3500+lbs),even towed cars(700miles) with it. Then a few mods and a little N2O(150shot) and high 10's @ 123mph for the last 4 yrs .
What does the truck weigh? and what is the rest of the combo? thanks!
|
|
|
Re: Stock 360 magnum, on spray, anyone done this??
[Re: Blown61]
#1291912
08/28/12 10:51 PM
08/28/12 10:51 PM
|
Joined: Feb 2004
Posts: 4,501 Gainesville,FL
goldmember
master
|
master
Joined: Feb 2004
Posts: 4,501
Gainesville,FL
|
The truck with driver is 3500lbs+ ,mild hyd roller,Magnum R/T heads unported,china RPM intake,holley 750DP,hooker headers,727, 9.5" PTC converter,3.73 gears,28" MT radials.
|
|
|
Re: Stock 360 magnum, on spray, anyone done this??
[Re: goldmember]
#1291913
08/28/12 10:56 PM
08/28/12 10:56 PM
|
Joined: Feb 2003
Posts: 1,572 wisconSIN
Blown61
OP
pro stock
|
OP
pro stock
Joined: Feb 2003
Posts: 1,572
wisconSIN
|
Quote:
The truck with driver is 3500lbs+ ,mild hyd roller,Magnum R/T heads unported,china RPM intake,holley 750DP,hooker headers,727, 9.5" PTC converter,3.73 gears,28" MT radials.
china rpm intake???? What cam??
|
|
|
|
|