1964 Distributor in a '67 block? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 1964 Distributor in a '67 block?

Print Thread

1964 Distributor in a '67 block? #1199057 03/18/12 07:15 PM 03/18/12 07:15 PM
Joined: Dec 2007 Posts: 12 Maryland Sixpaksteve OP member
Sixpaksteve OP member Joined: Dec 2007 Posts: 12 Maryland	Hello MOPARTS! I would appreciate any feedback / comments re a potential purchase I'm considering.... I'm looking at a 1964 dual point distributor for sale that my book says is for a 426 engine and the distributor numbers are Chrysler Part Number 2444335 and IBB 4202AS. Will this distributor fit and work properly in a 1967, 440 HP block? I'm building a Max Wedge Clone motor for my 1964 Polara convertible, automatic transmission. Thanks!

Re: 1964 Distributor in a '67 block? [Re: Sixpaksteve] #1199058 03/18/12 07:24 PM 03/18/12 07:24 PM
Joined: Mar 2003 Posts: 18,678 Fresno, CA Jim_Lusk I Live Here
Jim_Lusk I Live Here Joined: Mar 2003 Posts: 18,678 Fresno, CA	Yes, it will fit and work properly.

Re: 1964 Distributor in a '67 block? [Re: Jim_Lusk] #1199059 03/18/12 07:31 PM 03/18/12 07:31 PM
Joined: Aug 2003 Posts: 43,157 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,157 Bend,OR USA	Quote: Yes, it will fit and work properly. If you like dual point ignitions I had several 426 max Wedge motors with both the stock dual points and the Mallory flat cap dual points, the electronic ignitionss are way better ignitions, especially when it comes to hot starting The MSD race boxes are the best for starting Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: 1964 Distributor in a '67 block? [Re: Jim_Lusk] #1199060 03/18/12 07:32 PM 03/18/12 07:32 PM
Joined: Dec 2007 Posts: 12 Maryland Sixpaksteve OP member
Sixpaksteve OP member Joined: Dec 2007 Posts: 12 Maryland	Thanks Jim, I appreciate your reply!

Re: 1964 Distributor in a '67 block? [Re: Cab_Burge] #1199061 03/18/12 07:36 PM 03/18/12 07:36 PM
Joined: Dec 2007 Posts: 12 Maryland Sixpaksteve OP member
Sixpaksteve OP member Joined: Dec 2007 Posts: 12 Maryland	I appreciate your comments Mr. Cab. I have a dual point in my 440-6 Pak Cuda and it's been just fine for me so I'm not afraid to use it in my '64 as long as it's compatible with the '67 block I'm using, and it sounds like it is. :-) Thanks again! Steve

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1