70 Challenger SE
If You can help identifying or finding correct door ajar switches that mount behind the door.
On my wiring harness there are female bayonett type connectors 1/4" size. On both sides they were connected to 90deg angled contact with 1" long plastic ribbed pin - I assume it is an internal part of switch - the rest is gone
any idea?

Unfortunately those plastic switches are'nt being repoped...They function just like a metal door jamb switch but the plunger was plastic{with a secured metal ring for grounding} to keep from chipping the paint too much...A few alternatives until someone steps up would be...
A} Use the normal metal door pin switch
B} Use a {dare I say it} Chevy plastic door pin switch from one of the many types out there...{do a search even on Ebay you'll see them}
C}strike gold and find an NOS or good used...

I'd prefer option C myself but have'nt come across any for a loong time...

I did have pics of an original door ajar switch but have'nt found it yet...I'll keep digging...

thanks for info

I'll temporarly use sth that fits and dig for correct one

I'd appreciate if You could find that photo

This topic has come up before here but after searching I can't find the thread. I did however download some pics for my own use, that others had taken of the switches.

.

..

...

Apparently the switch from a mid-80's GM Astro Van is similar. Part # 15674628.

Another pic of the GM switch. (to whoever took these pics originally, thanks for the pics, and the tip about the GM switch!)

I just used the regular door switch in my gran coupe (same) been in there for thirty years never had a problem and who opens the door to see what they look like