|
Re: MY JEEP BUILD THREAD
[Re: Performance Only]
#1061458
10/15/12 12:08 AM
10/15/12 12:08 AM
|
Joined: Jul 2010
Posts: 2,091
Delray beach, Florida
Performance Only
top fuel
|
top fuel
Joined: Jul 2010
Posts: 2,091
Delray beach, Florida
|
Last one for now. more to follow tomorrow. i found the water pump doesn't sit flush to the housing. the flange on the pump is too tall and needs a little work to make it fit. no problem, i'll handle that and post a few more pictures as things progress. 
machine shop owner and engine builder
|
|
|
Re: MY JEEP BUILD THREAD
[Re: Performance Only]
#1061459
10/15/12 12:42 PM
10/15/12 12:42 PM
|
Joined: Jul 2010
Posts: 2,091
Delray beach, Florida
Performance Only
top fuel
|
top fuel
Joined: Jul 2010
Posts: 2,091
Delray beach, Florida
|
Here's a few more progress pic's
the water pump wouldn't sit inside the timing cover properly. I ended up chamfering the flange on the water pump (which was too tall to begine with) and then taking .100 off of it on the belt sander.
machine shop owner and engine builder
|
|
|
Re: MY JEEP BUILD THREAD
[Re: Performance Only]
#1061463
10/15/12 12:51 PM
10/15/12 12:51 PM
|
Joined: Jul 2010
Posts: 2,091
Delray beach, Florida
Performance Only
top fuel
|
top fuel
Joined: Jul 2010
Posts: 2,091
Delray beach, Florida
|
Basically I ended up doing the same thing with the intake manifold. I didn't want to take any chances with it since it was a used piece. It's all clean now inside and out.
machine shop owner and engine builder
|
|
|
Re: MY JEEP BUILD THREAD
[Re: 340SHORTY]
#1061469
10/15/12 05:52 PM
10/15/12 05:52 PM
|
Joined: May 2003
Posts: 15,487
Florida
scratchnfotraction
I Live Here
|
I Live Here
Joined: May 2003
Posts: 15,487
Florida
|
 about the mis-match on water pump,is that a LA timing cover with a magnum water pump? I know the LA t-cover will swap over to the magnum block and vis-versa. the last gasket set I had I noticed the t-cover gasket was the same for both blocks. 1 bolt hole is different location.IIRC water pump gasket was 2 different styles and looked like they would not swap. so would a little machine work be the fix for mixing the LA/magnum WP and t-covers? 
|
|
|
|
|
