Hello Moparts
Want your input her as i am on my way dropping an B&M built tranny in my 71 chally.
Thing is before pulling off trans i had rectangular washers or better named spacers between rear trans mount and nuts for holding the rear trans mount! Isnīt this way wrong location? aint the (washers/spacers) meant to be placed between trans mount and the machined aluminium tail housing? Am missing one of the original nuts with inbuilt free rotating washers, so if you got that nut please give me a note.
Another thing, calculating my rear wheel size and my 3.91 rear gear ratio i am in need of an 38tranny speedo wheel. Where do you recomed to turn for the speedo wheel?
Pm or e-mail
Thanks Moparts
michael@hisspartner.se/Michael
