I painted and cleared my Duster back in June, last week or so I've done some fine buffing on it. my trunk lid had some "dimples" in the clear, maybe from some contamination I didn't get cleaned up. Anyways, I wetsanded this side of the lid and removed the dimples, and proceeded to wetsand nto finer grits. to see what I had i hit it with some 3M perfect-It, and its hard to see in this picture but theres a cloudy ring that's formed. (look in the reflection of the trees to see it)

I'm wondering if I should maybe start back at a heavier grit and try again or just reclear this panel.

Basecoat is Chromabase, and the Clear is Nason line. the rest of the car looks great, this area is a little off though. thanks