oh!! I need that forrest gump smiley

still the same in the truck of a car though,rather pop a small round hole that wont takle much to weld back up later

I grabed a couple plastic plugs off some truck doors to go in the hols the run the hose thru it and I can just plug the hole if I dont use it

depends on you elect pump,they pump fuel not sux it so it needs to be close to the cell/tank

I used a big filter with the pump nippled right to it then hung them on the frame rail

will wire it like they said with oil pressure switch and relays/switch

the pistons are cool but anything to hold it up and bolt it down