How about this, we're sidetracked. Take the leads off of the coil and the ballast & ohm them (1) ballast (2)coil pri to pri (3)coil, either pri to center secondary on X 1000 (K) scale & post what you get. The nominal (listed) spec on the ballast supplied w the orange box kit is 1.25 ohms though there is some wiggle room there (less ohms=hotter spark shorter coil life & vice versa). lets see if we can ID what you have & almost forgot you have 2 ballasts so ohm each one & connect em in parallel and ohm the T'd ends again.