I have 2 rods that need to be rebushed. What happend is these 2 rods galled the bushings fairly severely. The rest have none to minor galling so I took all them to my machinist so he could hone them and loosen them up a bit. I thought I would have to replace the 2 severely galled rods but my machinist (I have a good relationsip with them and trust their work) suggested rebushing them if the bushings are available. They are mostly a chevy shop with a few mopars thrown in but they did not seem familiar with the mopar rod. It seems since the small ends are BBC size they would use the same bushing and be readily available. If anyone knew of a vendor with a part # this would really be helpful.

Thanks for any help,

Roger