I found my flow sheet for my 3614433 heads. I don't know what has been done on them as we got them on a trade deal.
Here are the flow #s,
lift Int exh
.200 148.9 133.6
.250 187.9 152.7
.300 220.9 174.4
.350 255.1 189.4
.400 276.9 199.8
.450 296.1 206.4
.500 311.0 210.0
.550 323.0 210.7
.600 331.5 211.8
.650 334.6 210.8
.700 340.7 209.7
.750 346.5 210.8
.800 351.2 209.0
The sheet shows a port area of 3.76 sq in on intake and it shows
3.15 sq in on the exhaust.
So these flowed better then I remembered but not as Good as some of yours. I may need to have them checked out to see if they can be made better/bigger but with a blower app maybe it's not needed.
I have my wedge blocks O-ringed with a copper gasket and they seal Good so I may go that route with the hemi if possible just because of the possibility of getting a blower for it.
Any comments on these is Appreciated.
Thanks David

p.s. these seem like they might be decent for a street/strip 36 ply coupe even if I went N/A. Your Thoughts???