Anyone using 7/16 pushrods??? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Anyone using 7/16 pushrods???

Print Thread

Re: Anyone using 7/16 pushrods??? [Re: 70satelliteguy] #925813 02/10/11 11:19 PM 02/10/11 11:19 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	I didnt have to touch the block for 7/16 tapered PRs but had to remove a ton of material from my B-1M/Cs

Entire Thread
Subject	Posted By	Posted
Anyone using 7/16 pushrods???	70satelliteguy	02/11/11 01:49 AM
Re: Anyone using 7/16 pushrods???	AndyF	02/11/11 02:01 AM
Re: Anyone using 7/16 pushrods???	70satelliteguy	02/11/11 02:04 AM
Re: Anyone using 7/16 pushrods???	Cab_Burge	02/11/11 03:00 AM
Re: Anyone using 7/16 pushrods???	MR_P_BODY	02/11/11 03:19 AM
Re: Anyone using 7/16 pushrods???	70satelliteguy	02/11/11 06:33 PM
Re: Anyone using 7/16 pushrods???	Monte_Smith	02/11/11 11:19 PM
Re: Anyone using 7/16 pushrods???	MR_P_BODY	02/12/11 02:41 AM
Re: Anyone using 7/16 pushrods???	Cudahlr	02/12/11 03:35 AM
Re: Anyone using 7/16 pushrods???	moparacer	02/12/11 03:48 AM
Re: Anyone using 7/16 pushrods???	DemonDust	02/12/11 03:56 AM
Re: Anyone using 7/16 pushrods???	Cab_Burge	02/12/11 04:46 AM
Re: Anyone using 7/16 pushrods???	joshking440	02/12/11 06:33 AM
Re: Anyone using 7/16 pushrods???	572stealth	02/12/11 11:57 AM
Re: Anyone using 7/16 pushrods???	70satelliteguy	02/12/11 02:35 PM
Re: Anyone using 7/16 pushrods???	dvw	02/13/11 04:21 PM
Re: Anyone using 7/16 pushrods???	Cab_Burge	02/13/11 05:42 PM
Re: Anyone using 7/16 pushrods???	Steve Barton	02/14/11 07:43 AM
Re: Anyone using 7/16 pushrods???	CompWedgeEngines	02/11/11 11:21 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1