MSD E Curve Distributor

Print Thread

Re: MSD E Curve Distributor [Re: Troy] #910708 01/23/11 12:14 PM 01/23/11 12:14 PM
Joined: Feb 2007 Posts: 316 Coolville, Ohio L Lew enthusiast
Lew enthusiast L Joined: Feb 2007 Posts: 316 Coolville, Ohio	Quote: Hello everybody.I have a question for you all. A friend of mind is dropping in one of these new MSD E Curve distributor. It is a real nice looking unit buy I have one BIG question. According to the directions that came with the distributor you "drop in the distributor with the rotor pointing to the #1 terminal on the cap and then tighten down the distributor housing". That is all fine but they do not tell you WHERE to rotate the housing TOO and tighten it down. How does the distributor know when to send the signal to the coil and tell the coil when to fire??OK troy i am not going to be much help but this all i have for now, put it in like they say, it will fire up, we put one in this past fall, have not got to tune on it yet due to winter setting in on us, tuning appears to be easy once you get your head wraped around it. Thanks everybody!!

Hop To