Junking a 71 steel crank 318 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Junking a 71 steel crank 318

Print Thread

Re: Junking a 71 steel crank 318 [Re: cudaman1969] #907219 01/19/11 11:16 PM 01/19/11 11:16 PM
Joined: Oct 2006 Posts: 46 Saskatchewan Canada F FrozenDuster member
FrozenDuster member F Joined: Oct 2006 Posts: 46 Saskatchewan Canada	Didn't early (pre73) 318's have floating piston pins as well?

Entire Thread
Subject	Posted By	Posted
Junking a 71 steel crank 318	QuickBpBp	01/17/11 03:45 PM
Re: Junking a 71 steel crank 318	babarracuda	01/17/11 03:49 PM
Re: Junking a 71 steel crank 318	340duster340	01/17/11 05:02 PM
Re: Junking a 71 steel crank 318	QuickBpBp	01/17/11 11:33 PM
Re: Junking a 71 steel crank 318	BDW	01/18/11 11:18 AM
Re: Junking a 71 steel crank 318	QuickDodge	01/18/11 06:35 PM
Re: Junking a 71 steel crank 318	SNK-EYZ	01/18/11 06:47 PM
Re: Junking a 71 steel crank 318	babarracuda	01/19/11 01:27 AM
Re: Junking a 71 steel crank 318	tmef	01/19/11 01:38 AM
Re: Junking a 71 steel crank 318	QuickBpBp	01/19/11 01:41 AM
Re: Junking a 71 steel crank 318	Dean_Kuzluzski	01/19/11 03:18 AM
Re: Junking a 71 steel crank 318	cudaman1969	01/20/11 01:57 AM
Re: Junking a 71 steel crank 318	FrozenDuster	01/20/11 03:16 AM
Re: Junking a 71 steel crank 318	cudaman1969	01/20/11 03:22 AM
Re: Junking a 71 steel crank 318	75DART440	01/20/11 03:22 AM
Re: Junking a 71 steel crank 318	QuickBpBp	01/20/11 09:22 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1