65 Coronet 440 build advice

Print Thread

65 Coronet 440 build advice #893090 12/31/10 10:28 PM 12/31/10 10:28 PM
Joined: May 2009 Posts: 150 Seymour,IN. H HoosierGTX OP member
HoosierGTX OP member H Joined: May 2009 Posts: 150 Seymour,IN.	Needing some advice on a future build,I have alot of old parts laying around my shop I would like to use. 65 Coronet 440-727,8 3/4,frames tied 68 440 .040 over with cast flattops stock steel crank with stock 535 rods with ARP bolts fresh stock 906 heads with Comp Cams springs 509-292 purpleshaft cam and lifters, Cloyes true roller chain Melling oil pump and Moroso pan and windage tray Eddy CH4B or RPM intake? 750 vac. second. Holley Carter mech. pump Mallory Unilite ignition Hedman 1 7/8's headers and flowmasters 10" TCI street fighter converter and 391's Any chance this car can get in the 12's? It will be steet driven occasionally and go to the track a few times a year,any advice on my combos will be greatly appreciated!

Hop To