340/727 to a 440/727 same driveshaft? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 340/727 to a 440/727 same driveshaft?

Print Thread

Re: 340/727 to a 440/727 same driveshaft? [Re: rtplumcrazy1] #858220 11/19/10 10:47 PM 11/19/10 10:47 PM
Joined: May 2003 Posts: 15,487 Florida S scratchnfotraction I Live Here
scratchnfotraction I Live Here S Joined: May 2003 Posts: 15,487 Florida	yes as long as both 727 have the same length tail shaft housing meausre from mount to end of housing should bolt right in same yoke and length

Entire Thread
Subject	Posted By	Posted
340/727 to a 440/727 same driveshaft?	rtplumcrazy1	11/20/10 02:42 AM
Re: 340/727 to a 440/727 same driveshaft?	scratchnfotraction	11/20/10 02:47 AM
Re: 340/727 to a 440/727 same driveshaft?	generallee6901	11/20/10 03:33 AM
Re: 340/727 to a 440/727 same driveshaft?	dragaddict	11/20/10 06:04 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1