Pistons for 360 - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Pistons for 360

Print Thread

Re: Pistons for 360 [Re: CoyoteJack] #840088 10/27/10 09:46 AM 10/27/10 09:46 AM
Joined: Feb 2003 Posts: 4,953 Houston, Texas TheOtherDodge master
TheOtherDodge master Joined: Feb 2003 Posts: 4,953 Houston, Texas	Best bet are to run some custom pistons so you can move your rings lower and get any compression height you desire. I run JE.

Entire Thread
Subject	Posted By	Posted
Pistons for 360	CoyoteJack	10/27/10 12:25 PM
Re: Pistons for 360	TheOtherDodge	10/27/10 01:46 PM
Re: Pistons for 360	dodge turbo	10/27/10 04:58 PM
Re: Pistons for 360	CoyoteJack	10/27/10 05:59 PM
Re: Pistons for 360	TheOtherDodge	10/27/10 09:54 PM
Re: Pistons for 360	dizuster	10/27/10 11:32 PM
Re: Pistons for 360	CoyoteJack	10/28/10 11:50 AM
Re: Pistons for 360	TheOtherDodge	10/28/10 01:51 PM
Re: Pistons for 360	dvw	10/28/10 02:03 PM
Re: Pistons for 360	dizuster	10/29/10 05:32 PM
Re: Pistons for 360	todd440	10/30/10 12:23 PM
Re: Pistons for 360	CoyoteJack	10/31/10 01:27 AM
Re: Pistons for 360	CoyoteJack	10/31/10 01:25 AM
Re: Pistons for 360	dizuster	11/01/10 12:56 AM
Re: Pistons for 360	CoyoteJack	11/01/10 12:36 PM
Re: Pistons for 360	dizuster	11/01/10 07:39 PM
Re: Pistons for 360	CoyoteJack	11/01/10 07:55 PM
Re: Pistons for 360	dodge turbo	11/01/10 08:17 PM
Re: Pistons for 360	dizuster	11/02/10 12:14 AM
Re: Pistons for 360	todd440	11/02/10 12:24 AM
Re: Pistons for 360	dizuster	11/02/10 12:32 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1