I aligned my dragster front end off the rear tires. The string from the rear tires to the front tires. I put them about a 1/16 toe in on each side. But when I measured rear center to center then front center to center I had about 1/2 to 9/16 toe in.

I put my new engine in & took it to T&T last Sunday. At about 400 ft the steering wheel wanted to jerk from side to side. I did not feel a vibration like when the front tires are out of balance, it was more like the front wheels were moving back & forth.

A man told me this afternoon on a solid front suspension I first needed to get the steering wheel center(I know where the center is on the steering box) Then I need to get the rear center to center and the front center to center exact or as close as possible. This man is not a chassis builder but he is very smart. I was hoping someone could tell me if this is the correct way to do this or if there is a better way. I really appreciate any advice you have! Thanks