Quote:

so if the dwell is electronically controlled and it registers as low do I then replace the electronic part?



Hard to say. You would have to know if that dwell time is normal or not for the electronic module? You could spin the distrubitor by hand or with a drill and check if your getting a good spark?

You may have this?
http://www.pertronix.com/prod/ig/ignitor2/default.aspx

Pertronix Ignitor II. Saya it has "adaptive" dwell control? at idle it looks like it has about 10-degrees dewll, but it increases with RPM.

Last edited by 451Mopar; 06/30/08 01:31 AM.