Could someone tell me what this works out to??

Print Thread

Re: Could someone tell me what this works out to?? [Re: moparmattkos] #808849 09/20/10 01:30 AM 09/20/10 01:30 AM
Joined: Oct 2007 Posts: 846 Illinois moparmattkos OP mopar addict
moparmattkos OP mopar addict Joined: Oct 2007 Posts: 846 Illinois	So if this is right then this piston will be - .072 in the hole before decking the block right? Bore Blck Comp height 73cc 232453 4.375 10.699 1.858 10.1 Dome Vol Gram weight -28.9 710 grams What would compression ratio on this be with a 75cc head and a .20 head gasket with surfacing .010 off the block???? www.sikosracing.net Heads up Drag racing

Entire Thread
Subject	Posted By	Posted
Could someone tell me what this works out to??	moparmattkos	09/20/10 04:27 AM
Re: Could someone tell me what this works out to??	1_WILD_RT	09/20/10 04:42 AM
Re: Could someone tell me what this works out to??	moparmattkos	09/20/10 04:48 AM
Re: Could someone tell me what this works out to??	WILD BILL	09/20/10 04:56 AM
Re: Could someone tell me what this works out to??	moparmattkos	09/20/10 05:00 AM
Re: Could someone tell me what this works out to??	moparmattkos	09/20/10 05:30 AM
Re: Could someone tell me what this works out to??	1_WILD_RT	09/20/10 05:32 AM
Re: Could someone tell me what this works out to??	moparmattkos	09/20/10 05:45 AM
Re: Could someone tell me what this works out to??	1_WILD_RT	09/20/10 05:49 AM
Re: Could someone tell me what this works out to??	moparmattkos	09/20/10 05:52 AM
Re: Could someone tell me what this works out to??	1_WILD_RT	09/20/10 05:58 AM
Re: Could someone tell me what this works out to??	moparmattkos	09/20/10 06:12 AM
Re: Could someone tell me what this works out to??	1_WILD_RT	09/20/10 06:19 AM
Re: Could someone tell me what this works out to??	1_WILD_RT	09/20/10 05:00 AM
Re: Could someone tell me what this works out to??	451Mopar	09/20/10 05:22 AM
Re: Could someone tell me what this works out to??	1_WILD_RT	09/20/10 05:30 AM

Hop To