340 cam suggestions needed

Print Thread

Re: 340 cam suggestions needed [Re: forphorty] #802553 10/15/10 03:19 PM 10/15/10 03:19 PM
Joined: Sep 2009 Posts: 69 Menomonie,wi M menomoniemopars OP member
menomoniemopars OP member M Joined: Sep 2009 Posts: 69 Menomonie,wi	Well according to my brother it was making 350 ftlbs at 3000, so i think it may be ok.. This is just a nice cruiser , doubt it will see the track by him

Entire Thread
Subject	Posted By	Posted
340 cam suggestions needed	menomoniemopars	09/16/10 03:05 AM
Re: 340 cam suggestions needed	scratchnfotraction	09/16/10 03:10 AM
Re: 340 cam suggestions needed	menomoniemopars	09/16/10 03:25 AM
Re: 340 cam suggestions needed	Dave_J	09/16/10 04:01 AM
Re: 340 cam suggestions needed	Lew	09/22/10 11:59 PM
Re: 340 cam suggestions needed	73swinger	09/16/10 04:15 AM
Re: 340 cam suggestions needed	patrick	09/16/10 02:27 PM
Re: 340 cam suggestions needed	Mr. T	09/16/10 04:08 PM
Re: 340 cam suggestions needed	menomoniemopars	09/16/10 05:07 PM
Re: 340 cam suggestions needed	tampacuda69	09/16/10 10:34 PM
Re: 340 cam suggestions needed	RobX4406	09/17/10 01:11 AM
Re: 340 cam suggestions needed	menomoniemopars	09/22/10 02:58 AM
Re: 340 cam suggestions needed	Dodgem	09/23/10 11:36 AM
Re: 340 cam suggestions needed	451Mopar	09/22/10 04:34 AM
Re: 340 cam suggestions needed	menomoniemopars	09/22/10 01:11 PM
Re: 340 cam suggestions needed	451Mopar	09/23/10 06:35 AM
Re: 340 cam suggestions needed	menomoniemopars	09/23/10 12:42 PM
Re: 340 cam suggestions needed	451Mopar	09/23/10 03:41 PM
Re: 340 cam suggestions needed	Dodgem	09/23/10 04:33 PM
Re: 340 cam suggestions needed	YO7_A66	09/23/10 04:52 PM
Re: 340 cam suggestions needed	menomoniemopars	09/23/10 04:59 PM
Re: 340 cam suggestions needed	73swinger	09/23/10 07:40 PM
Re: 340 cam suggestions needed	menomoniemopars	09/23/10 10:24 PM
Re: 340 cam suggestions needed	menomoniemopars	10/14/10 07:15 PM
Re: 340 cam suggestions needed	73swinger	10/14/10 10:27 PM
Re: 340 cam suggestions needed	RobX4406	10/14/10 10:31 PM
Re: 340 cam suggestions needed	menomoniemopars	10/15/10 01:33 AM
Re: 340 cam suggestions needed	forphorty	10/15/10 06:18 PM
Re: 340 cam suggestions needed	menomoniemopars	10/15/10 07:19 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To