Tight Clearance - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Tight Clearance

Print Thread

Tight Clearance #769203 08/08/10 10:22 PM 08/08/10 10:22 PM
Joined: Dec 2008 Posts: 415 Peru cbarracuda OP mopar
cbarracuda OP mopar Joined: Dec 2008 Posts: 415 Peru	According to experience, how tight can you set valve to piston clearance to spin the motor at 7000 rpm? Also, in a big flat tappet, what do you use for sit spring pressure?

Entire Thread
Subject	Posted By	Posted
Tight Clearance	cbarracuda	08/09/10 02:22 AM
Re: Tight Clearance	Cab_Burge	08/09/10 02:34 AM
Re: Tight Clearance	cbarracuda	08/09/10 03:20 AM
Re: Tight Clearance	'72CudaRacer	08/09/10 03:51 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1