Torqueing lock nut on Band adjustment for on 727

Print Thread

Torqueing lock nut on Band adjustment for on 727 #762940 08/01/10 05:34 PM 08/01/10 05:34 PM
Joined: Mar 2003 Posts: 3,358 Berwyn, IL challenger70 OP master
challenger70 OP master Joined: Mar 2003 Posts: 3,358 Berwyn, IL	Is there a trick to torqueing the lock nut to the 30ft-lbs but not moving the adjusting bolt after it's adjusted properly? would a crows foot work? What is the chrysler special tool for this?

Entire Thread
Subject	Posted By	Posted
Torqueing lock nut on Band adjustment for on 727	challenger70	08/01/10 09:34 PM
Re: Torqueing lock nut on Band adjustment for on 727	Anonymous	08/01/10 10:09 PM
Re: Torqueing lock nut on Band adjustment for on 727	challenger70	08/01/10 11:44 PM
Re: Torqueing lock nut on Band adjustment for on 727	Andrewh	08/01/10 11:46 PM
Re: Torqueing lock nut on Band adjustment for on 727	challenger70	08/01/10 11:47 PM
Re: Torqueing lock nut on Band adjustment for on 727	Crizila	08/01/10 11:57 PM
Re: Torqueing lock nut on Band adjustment for on 727	dusturbd340W5	08/02/10 01:31 AM
Re: Torqueing lock nut on Band adjustment for on 727	dOc !	08/02/10 03:18 AM
Re: Torqueing lock nut on Band adjustment for on 727	challenger70	08/02/10 06:09 AM
Re: Torqueing lock nut on Band adjustment for on 727	RapidRobert	08/02/10 06:38 AM
Re: Torqueing lock nut on Band adjustment for on 727	dOc !	08/02/10 06:51 AM
Re: Torqueing lock nut on Band adjustment for on 727	RapidRobert	08/02/10 07:05 AM
Re: Torqueing lock nut on Band adjustment for on 727	dOc !	08/02/10 07:17 AM
Re: Torqueing lock nut on Band adjustment for on 727	therocks	08/02/10 02:18 PM

Hop To