Been digging for info on using the GM 3100 V6 beehive springs on magnum heads, so i need some help from the gurus... If i slap a set of stock magnum heads on a LA roller block with a roller hydraulic of these specs:

Camshaft Technical Details
Intake Valve Lift 1.5
Exhaust Valve Lift 1.5 .480"
.487"
Intake Valve Lift 1.6
Exhaust Valve Lift 1.6 .512"
.520"
Intake Duration at .050"
Exhaust Duration at .050" 208°
214°
Lobe Separation Angle 114
Intake Opening at .050"
Exhaust Opening at .050" -7° BTC
44° BBC
Intake Closing at .050"
Exhaust Closing at .050" 35° ABC
-10° ATC
Min. Suggested Cylinder PSI 165
Sweet Spot RPM 1800 - 5500

Will the gm springs and retainers and magnum valve stem locks work?