Dropped off the oil pan and pickup yesterday to Mike Thompson for the 360/408 build and he received 90% of the new parts for the build
Still waiting on the cam and this is one of those work on it while you slow deals, but it should go pretty quickly....in fact probably way sooner than I'll be ready to drop it in
Anyway here's the spec's, what do you think it will make....????? My guess is going to be 450hp & around 500# torque
360 LA 4.030 bore
KB Icon Forged Pistons / Flat Top @ Zero Deck
11 to 11.5 Compression (yes it will need a li'l race gas
J-Heads - 2.02 / 1.60 Massaged Nicely (we did go back and do a bowl cut to the previous existing work - came out nice)
Cam 240/246 507/510 106/110 Hyd/Flat
PRW 1.5 Aluminum Rockers
4" Scat Cast Crank
6.123 Scat I-Beam Rods
Weiand Tunnel Ram w/2 Edelbrock 600's
1 5/8" - 1 3/4" to 3" collectors through 3" full exhaust.
Rickster