I put in a 4 spd overdrive trans into my cuda today. It is a used unit and the owner said it was rebuilt by liberty gears and had about 500 miles on it. I have two questions.

1. He said that 3rd and 4rth are reversed and the shift rod had to be under the tab comeing out of the trans instead of above it. I could not see how to do this and just set it up normally. So I would shift 1st, 2nd, 4th, 3rd. How can I correct this? Does the rod need to be bent or something?

2. When driving there is a slight wur coming from the trans. I am too young to have seen these cars new and dont know if that is normal ot not. My friend said old trannies have strait cut gears and they tend to be a bit noisy, but I dont know if he knows what he is talking about.

Matt