Advice on using 3 stone honing tool

Print Thread

Re: Advice on using 3 stone honing tool [Re: blown360] #748270 07/15/10 02:45 PM 07/15/10 02:45 PM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	If your just freshening up the engine and the seal was good and the bores are straight and your only going to rering it and change the inserts,them I would just use a ball hone.The 3 stone hone will remove more material than a ball hone(dingleberry) [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Entire Thread
Subject	Posted By	Posted
Advice on using 3 stone honing tool	blown360	07/14/10 07:17 PM
Re: Advice on using 3 stone honing tool	MR_P_BODY	07/14/10 07:44 PM
Re: Advice on using 3 stone honing tool	blown360	07/15/10 05:09 PM
Re: Advice on using 3 stone honing tool	B G Racing	07/15/10 06:45 PM

Hop To