Agreed on the Rage Gold,I use it on any motorcycle sheet metal requiring filler at my shop.Shapes and sands easily with 80 grit(shape as much as you can before it dries!).Few if any pinholes to glaze,shrinkage seems to be minimum.Make sure you use a good catalyzed primer over the filer.I use House of Kolor or PPG primers to be used with their respective topcoats.There are many good primers out there,but I like to use the same product brand start to finish.Using one manufacturers product(prime to paint)will greatly reduce any problems due to any incompatible chemical makeup.-Ron
see some paint examples on my site: www.northhillscycle.com