452 to replace 915 in a pinch? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 452 to replace 915 in a pinch?

Print Thread

Re: 452 to replace 915 in a pinch? [Re: JohnRR] #695708 05/12/10 12:04 PM 05/12/10 12:04 PM
Joined: Feb 2010 Posts: 155 Tulsa oklahoma USA 2 2734bbl OP member
2734bbl OP member 2 Joined: Feb 2010 Posts: 155 Tulsa oklahoma USA	Yes I know the quench wont be ideal.It is zero deck. I was considering milling to 83 CC and steel shim gasket. I'd like to keep the CR 10 to 10.5 if I can. If I have to mix my fuel a little I'm good with that.I believe the 915s would put me above that even with a .040 gasket?

Entire Thread
Subject	Posted By	Posted
452 to replace 915 in a pinch?	2734bbl	05/12/10 02:42 PM
Re: 452 to replace 915 in a pinch?	DaytonaTurbo	05/12/10 02:44 PM
Re: 452 to replace 915 in a pinch?	JohnRR	05/12/10 03:50 PM
Re: 452 to replace 915 in a pinch?	2734bbl	05/12/10 04:04 PM
Re: 452 to replace 915 in a pinch?	JohnRR	05/12/10 04:06 PM
Re: 452 to replace 915 in a pinch?	2734bbl	05/12/10 04:14 PM
Re: 452 to replace 915 in a pinch?	Dodgem	05/12/10 04:27 PM
Re: 452 to replace 915 in a pinch?	can.al	05/12/10 11:26 PM
Re: 452 to replace 915 in a pinch?	Mr.Yuck	05/13/10 12:26 PM
Re: 452 to replace 915 in a pinch?	JohnRR	05/13/10 01:24 PM
Re: 452 to replace 915 in a pinch?	Mr.Yuck	05/13/10 02:02 PM
Re: 452 to replace 915 in a pinch?	2734bbl	05/13/10 02:56 PM
Re: 452 to replace 915 in a pinch?	JohnRR	05/13/10 01:24 PM
Re: 452 to replace 915 in a pinch?	RapidRobert	05/13/10 12:55 PM
Re: 452 to replace 915 in a pinch?	2734bbl	05/13/10 01:30 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1