Hello all, I’m considering upgrading from stock factory rockers on my 440 to a set of adjustables most likely from Crane. Since they come in 1.5 and 1.6 ratios I was hoping to hear what you think would be the best choice for my particular engine. Here are some specs-

100 miles on complete rebuild.
TRW Flat top Pistons, 30 over.
10.5:1 compression.
906 heads with stock valves and ports.
Elgin hydraulic cam with 241 duration, .484 lift, centerline is 108.

Car has manual brakes. It is just driven for fun on the weekends.

Thanks in advance for your opinions.