|
Re: Brake lines probs is proportioning valve right?
[Re: MoparKansas]
#677846
04/23/10 04:40 PM
04/23/10 04:40 PM
|
Joined: Feb 2005
Posts: 28,312 Cincinnati, Ohio
Challenger 1
Too Many Posts
|
Too Many Posts
Joined: Feb 2005
Posts: 28,312
Cincinnati, Ohio
|
Quote:
To clarify even though I will be using manual brakes I told them it was power brakes as I knew the lines on it worked before.
Your never bend stainless, after it's bent like that.
Should have told them exactly what your using parts wise, so they can make the right lines for you.
Like what the other guys said, you can make those easy with reg steel brake lines from the auto parts store, plus then they will seal.
Tip on the stainless lines, lub the fittings well so you can really get them tight, cause there gonna need to be really tight to seal. Stainless is hard. Good luck with it.
|
|
|
|
|
|