Rotella T 15/40 to Rotella 5/40 Synthetic

Print Thread

Rotella T 15/40 to Rotella 5/40 Synthetic #670511 04/15/10 01:45 PM 04/15/10 01:45 PM
Joined: Jan 2005 Posts: 2,179 S.E. Conn Hoof Hearted OP top fuel
Hoof Hearted OP top fuel Joined: Jan 2005 Posts: 2,179 S.E. Conn	Just did my yearly oil change my 69 coronet; Went from Rotella T 15/40 to Rotella 5/40 Synthetic... Oil pressure still on the high side, 80lbs cold idle, 45 hot idle after 20 mins and a couple of high rpm highway runs, temp at 170, outside at 60ish. Any thoughts on this oil? Was looking for slightly lower oil pressure on fire up, not finding it. Any additional additives needed for flat tappet 550" lift cam? Thanks for all input. 2005 300C Hemi 2014 Ram ProMaster 2500 I Rekey, Repin old Chrysler locks and cut keys by code

Entire Thread
Subject	Posted By	Posted
Rotella T 15/40 to Rotella 5/40 Synthetic	Hoof Hearted	04/15/10 05:45 PM
Re: Rotella T 15/40 to Rotella 5/40 Synthetic	JoesMopar	04/16/10 01:49 AM
Re: Rotella T 15/40 to Rotella 5/40 Synthetic	Joshs68	04/16/10 01:58 AM
Re: Rotella T 15/40 to Rotella 5/40 Synthetic	ahy	04/16/10 02:44 AM

Hop To