small block oiling question

Print Thread

Re: small block oiling question [Re: demon454] #664191 04/07/10 11:08 PM 04/07/10 11:08 PM
Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere S S/ST 3040 master
S/ST 3040 master S Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere	With push rod oiling the only way to get oil to the driver's side oil galley, is through the passage from the passenger side galley, down to #1 main, then back up to driver's side. BTW, #8 is the closest to the pump. It could be you are not producing enough volume with the drill. I'm assuming the oil passages was clean, when it was assembled.

Entire Thread
Subject	Posted By	Posted
small block oiling question	demon454	04/08/10 02:39 AM
Re: small block oiling question	S/ST 3040	04/08/10 03:08 AM
Re: small block oiling question	S/ST 3040	04/08/10 03:21 AM
Re: small block oiling question	demon454	04/08/10 03:32 AM

Hop To