Quote:

Bob,

What my brother did with his 588" in his Polara that was o-ringed was use the Permatex Ultra Copper in a spray can. He would spray on a half dozen coats or more of the stuff on each side, letting each coat tack up before spraying the next. Never had a leak problem, and this was with regular copper gaskets.

... thats what i did..i'm using the SCE Titans...i originally installed them dry, with fresh machine shop deck surfaces, and they leaked. ..ended up using a scotch bright to clean off the embossed o'ring around the water holes..then used the Permatex stuff...hasn't leaked since.

5907930-Picture002.jpg (242 downloads)
-1967 Plymouth Satellite #3555
446 cid on E-85
best 1/4 et 10.577 @ 127.58
best 1/8 et 6.722 @ 100.68
best 60ft. 1.419