Small block timing chain oiling.

Print Thread

Re: Small block timing chain oiling. [Re: flatiron] #657721 04/02/10 12:54 AM 04/02/10 12:54 AM
Joined: May 2008 Posts: 5,399 Aurora, Colorado 451Mopar master
451Mopar master Joined: May 2008 Posts: 5,399 Aurora, Colorado	On my tensioner plate, i drilled the 4th hole and bolted it on. The tensioner plate has an oiling tab. I did not drill a oiling hole in the plate where the oil galley is (no problems so far), but it might help. I just would not go too large with the hole because it could reduce your oil pressure/volume going to the bearings. 5902621-0211071913.jpg (1244 downloads)

Entire Thread
Subject	Posted By	Posted
Small block timing chain oiling.	flatiron	04/01/10 11:52 AM
Re: Small block timing chain oiling.	scratchnfotraction	04/01/10 12:55 PM
Re: Small block timing chain oiling.	The_Mean_Machine	04/01/10 01:01 PM
Re: Small block timing chain oiling.	RapidRobert	04/01/10 01:12 PM
Re: Small block timing chain oiling.	flatiron	04/01/10 06:56 PM
Re: Small block timing chain oiling.	IronWolf	04/01/10 08:27 PM
Re: Small block timing chain oiling.	451Mopar	04/02/10 04:54 AM
Re: Small block timing chain oiling.	RapidRobert	04/02/10 01:20 PM
Re: Small block timing chain oiling.	MoparforLife	04/02/10 02:46 PM
Re: Small block timing chain oiling.	RapidRobert	04/02/10 06:51 PM
Re: Small block timing chain oiling.	MoparforLife	04/02/10 10:43 PM
Re: Small block timing chain oiling.	flatiron	04/03/10 05:18 AM
Re: Small block timing chain oiling.	MoparforLife	04/03/10 12:13 PM
Re: Small block timing chain oiling.	451Mopar	04/03/10 03:10 PM

Hop To