318 distributor and timing questions

Print Thread

Re: 318 distributor and timing questions [Re: MoparforLife] #629986 03/06/10 04:57 AM 03/06/10 04:57 AM
Joined: Sep 2003 Posts: 1,535 North Las Vegas chewy pro stock
chewy pro stock Joined: Sep 2003 Posts: 1,535 North Las Vegas	Quote: Quote: you can also plug the air injection holes by taping the holes with 1/4" 20 and put a set screw or bolt and cut off the head in the hole. Clean the holes well and fill and level JB weld. Done it may times and never had one fail yet. I had one start leaking on a set that I did with jb. So For that exhaust port, I took a very slightly tapered pin that barely fit one end in the hole and tamped it in with ball-peen hammer. (Ace Hardware) worked like charm

Entire Thread
Subject	Posted By	Posted
318 distributor and timing questions	wagonman	03/04/10 12:57 AM
Re: 318 distributor and timing questions	RemCharger	03/04/10 01:19 AM
Re: 318 distributor and timing questions	partfiler69	03/04/10 01:34 AM
Re: 318 distributor and timing questions	65rbdodge	03/04/10 01:08 PM
Re: 318 distributor and timing questions	MoparforLife	03/04/10 02:11 PM
Re: 318 distributor and timing questions	Fastfrankie	03/06/10 02:41 AM
Re: 318 distributor and timing questions	chewy	03/06/10 08:57 AM
Re: 318 distributor and timing questions	RapidRobert	03/04/10 01:34 AM
Re: 318 distributor and timing questions	451Mopar	03/06/10 07:33 AM

Hop To