727 first to second bind-up problem

Print Thread

Re: 727 first to second bind-up problem [Re: uponblocks] #62200 05/26/08 07:38 PM 05/26/08 07:38 PM
Joined: Jan 2003 Posts: 25,951 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,951 Rio Linda, CA	The 2.9 lever isn't ideal but it has been used an many TF's without problem; the low ratio levers should be adjusted looser than other levers, try backing out 2.5 turns. All of the problems seem to point to a problem in the rear band/servo except for your statement "I tried to accelerate, and the truck tries to lurch ahead, but wont move". Did this happen with the shifter in "1"? If it did, there are multiple problems because a rear band problem wouldn't prevent the vehicle from moving. The INTERNET, the MISinformation superhighway

Entire Thread
Subject	Posted By	Posted
727 first to second bind-up problem	uponblocks	05/23/08 07:55 PM
Re: 727 first to second bind-up problem	JohnRR	05/23/08 08:17 PM
Re: 727 first to second bind-up problem	John_Kunkel	05/23/08 08:26 PM
Re: 727 first to second bind-up problem	uponblocks	05/23/08 09:10 PM
Re: 727 first to second bind-up problem	uponblocks	05/23/08 09:59 PM
Re: 727 first to second bind-up problem	451Mopar	05/24/08 07:05 AM
Re: 727 first to second bind-up problem	uponblocks	05/26/08 03:40 AM
Re: 727 first to second bind-up problem	JohnRR	05/26/08 02:28 PM
Re: 727 first to second bind-up problem	uponblocks	05/26/08 10:29 PM
Re: 727 first to second bind-up problem	John_Kunkel	05/26/08 11:38 PM
Re: 727 first to second bind-up problem	uponblocks	05/27/08 02:21 AM
Re: 727 first to second bind-up problem	uponblocks	05/27/08 03:19 AM
Re: 727 first to second bind-up problem	John_Kunkel	05/28/08 07:38 PM

Hop To