Quote:

Thank you very much for all the help guys. I have a few more questions:

How hard is it to change the wheel bearing? Are there any special tools needed?

And how hard is it to take off the cv shafts? Are there any special tools needed for this? One end of the shaft is connected to the wheel hub, whats the other end connected to? How does each end come off, and is there anything on the other end I need to worry about falling apart while driving?

Is there a step by step guide for changing the wheel bearing or removing the shafts?

Thanks again!




I don't know the procedure on your vehicle but usually it at least requires a stout puller. If I were going to tackle it I'd buy a service manual first. The parts store variety of manual is probably sufficient.

I understand funds are short - been there myself. Still you would be way ahead to take it to a garage you trust for diagnosis and repair options. Even if it costs $50 a correct diagnosis can save you hundreds plus get the use of your vehicle (and maybe 4wd) back faster. I'd ask around for suggestions on mechanic that can help look at and drive it.