|
Re: Highest lift cam on stock 440 ?
[Re: Dodgeballs]
#522757
11/11/09 04:33 PM
11/11/09 04:33 PM
|
Joined: Jan 2003
Posts: 24,562 Brookeville, Md
Mr.Yuck
Not enough dumb comments...yet
|
Not enough dumb comments...yet
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
|
Quote:
Man, I guess SS was right. I should have posted more info. My car is a 4 speed/4.56 rear. Gonna have headers. I'd run a 557 if it won't play Chuck Woolery and make a Love Connection between my pistons and valves. Six Pack or Performer RPM.
Quote:
528 solid would probably work well. The 557 and 509 will require a good stall (3000+) and 3.91's or better. Also if you want to run the 509, be sure you have headers, a good dual plane intake, 750DP, along with the stall and gears, otherwise it's going to be a DOG out of the hole. TRUST me on that.
Why not try a newer cam grind? Straightline makes some good cams. I think the 6 pack pistons should be ok w/ a 557. after you subtract the lash you're about 537 or so.
|
|
|
|
|
|