Well it hasn't been easy and I'm still not done. Basically the EZ heads don't really like this much lift! The standard valve setup gives you about 1.900 installed height which isn't quite enough to get 0.800 lift. I went with a +0.050 retainer and a +0.050 lock to get to 2.00 but that combination made the rocker arm rub on the retainer. With a standard lock and some fudging around it looks like I can get setup at 1.975. The PSI springs I'm using coil bind at 1.100 so I should have room to get close to 0.800 lift.

Here is a picture of the EZ heads with the cam at full lift. This cam has .830 gross lift so with lash it is about 0.800 net.