Repo seat foam is available for the 72’ style bucket seats. The repos lack the burlap/piano wire matting molded into the original seat bottoms. I created burlap/piano wire mats to lay over the seat bottom springs, similar to the way the rear seat bottoms are assembled.


Comparing my original 72’ bucket seat RR to my donor 72’ bench seat Satellite Sebrings, the bench seat outboard mounting holes use the same “dimples” in the floor pan as does the manual bucket seats. There are dimples in the floor pan that correspond to the inboard bucket mounting. The factory welded reinforcement plates onto the top of the floor pans at the inboard bucket seat mounting on these b-bodies. Reproductions of these plates are offered on Ebay from time to time by Rocket Restorations.

You will find other dimples for what I believe could be for the 6-way power buckets located about 2 inches outboard of the manual bucket seat holes.