Well

I didnt get much time to to make more than 3 passes, so I dont hava lot of info, but I am running longer shocks with the springs I think they are Summit brand 90/10s up front, and thematching rear shocks for the car/springs etc. They are made by qa1 I was tolk. I started at 32 psi cause I just wanted to know what it would do in total street trim, Then I ran 17 psi the 2nd pass (which was the fastest) but still a 2.25 60ft, then on the hardest hooking run I dropped to 10 psi.

My 1/8 mile was 1st, a 9.5, 2nd 9.0, and 3rd 9.2...

I have the fuel PSI at 6.5 with my crappy summit guage, and its a new holley fuel pump. Engine Ran great, really great accually. It never nosed over, farted, or even bogged when it did hook in 2nd gear.

Im sure I just have a low MPH due to wicked tire spinn.

MoparJoe, Im sure my mph will come inn.

I have a 408 in the works, and the machining is almost done!!!