engine guys, #3 bearing cap won't seat ? **update**

Print Thread

Re: engine guys, #3 bearing cap won't seat properly? [Re: gregsdart] #461818 09/07/09 04:00 PM 09/07/09 04:00 PM
Joined: Aug 2003 Posts: 43,293 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,293 Bend,OR USA	Quote: Went out and measured the studs, and cap holes. Studs, .497. Caps, .530 . Plenty of room in all directions, no binding. I looked at # 1 with the dial bore gauge and came up with results that are similar but not as bad. Also the minimum diameter of the # 1 bearing bore is .0005 looser than #3. I wire brushed the cap to clean off the cap walk gunk but it is still out of tolerance in my mind. Think it is time to have this block line honed. What do you guys think? I don't want to spin a bearing. you have plenty of bearing to crank clearences and(if) it has been running okay so far so it is uo to you, do what you thank is best Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Entire Thread
Subject	Posted By	Posted
engine guys, #3 bearing cap won't seat ? update	gregsdart	09/07/09 05:36 PM
Re: engine guys, #3 bearing cap won't seat properly?	dvw	09/07/09 05:51 PM
Re: engine guys, #3 bearing cap won't seat properly?	1_WILD_RT	09/07/09 05:55 PM
Re: engine guys, #3 bearing cap won't seat properly?	RonP	09/07/09 05:58 PM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/07/09 06:03 PM
Re: engine guys, #3 bearing cap won't seat properly?	RonP	09/07/09 06:12 PM
Re: engine guys, #3 bearing cap won't seat properly?	1_WILD_RT	09/07/09 06:16 PM
Re: engine guys, #3 bearing cap won't seat properly?	ccdave	09/08/09 02:25 AM
Re: engine guys, #3 bearing cap won't seat properly?	CompWedgeEngines	09/07/09 06:27 PM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/07/09 07:29 PM
Re: engine guys, #3 bearing cap won't seat properly?	Cab_Burge	09/07/09 08:00 PM
Re: engine guys, #3 bearing cap won't seat properly?	emarine01	09/07/09 08:14 PM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/07/09 08:20 PM
Re: engine guys, #3 bearing cap won't seat properly?	Ron Silva	09/07/09 08:38 PM
Re: engine guys, #3 bearing cap won't seat properly?	Hemiroid	09/07/09 08:42 PM
Re: engine guys, #3 bearing cap won't seat properly?	B G Racing	09/07/09 08:56 PM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/07/09 09:17 PM
Re: engine guys, #3 bearing cap won't seat properly?	jamesc	09/07/09 11:51 PM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/08/09 12:26 AM
Re: engine guys, #3 bearing cap won't seat properly?	Ron Silva	09/08/09 01:00 AM
Re: engine guys, #3 bearing cap won't seat properly?	jamesc	09/08/09 01:41 AM
Re: engine guys, #3 bearing cap won't seat properly?	dvw	09/08/09 01:47 AM
Re: engine guys, #3 bearing cap won't seat properly?	JohnRR	09/08/09 02:08 AM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/08/09 04:18 AM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/08/09 04:34 AM
Re: engine guys, #3 bearing cap won't seat properly?	Monte_Smith	09/08/09 05:07 AM
Re: engine guys, #3 bearing cap won't seat properly?	JohnRR	09/08/09 05:09 AM
Re: engine guys, #3 bearing cap won't seat properly?	Al_Alguire	09/08/09 05:14 AM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/08/09 12:47 PM
Re: engine guys, #3 bearing cap won't seat properly?	The Shadow	09/08/09 12:55 PM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/08/09 01:01 PM
Re: engine guys, #3 bearing cap won't seat properly?	The Shadow	09/08/09 01:21 PM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/08/09 02:55 PM
Re: engine guys, #3 bearing cap won't seat properly?	Cab_Burge	09/08/09 04:19 PM
Re: engine guys, #3 bearing cap won't seat properly?	JohnRR	09/08/09 08:53 PM
Re: engine guys, #3 bearing cap won't seat properly?	602heavy	09/08/09 09:03 PM
Re: engine guys, #3 bearing cap update	gregsdart	09/08/09 09:33 PM
Re: engine guys, #3 bearing cap update	gregsdart	09/15/09 01:09 PM
Re: engine guys, #3 bearing cap won't seat properly?	S/ST 3040	09/09/09 12:57 AM
Re: engine guys, #3 bearing cap won't seat properly?	Moparnut426	09/08/09 12:16 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To