I had the Demon up on a floor jack on the passenger side, and the hood was open at the time. I accidently let it down too fast, and I heard something "clank" inside the fender. Now the passenger side hood spring is floppy; i.e.- have to hold up the hood with a prop rod and the hood actually sank a bit on that side. When I looked at the spring in the fenderwell area, I noticed that on the round tension spring in there, there's a barrel shaped peg at about the 6 'oclock position, well the question mark shaped tab that is usually held up against that is now at the 12 o'clock position. My question is, am I FUBAR'd or is there a way to re-tension the spring? or does it sound like its shot. And how does it come out if I have to get it out and have it rebuilt/replaced. Does anyone/anyplace rebuild them?

Thanks in advance. This is very frustrating.