Quote:

Yes, the 3/8 line will fit right on there...Just keep in mind your original set-up has the vent line from the tank to the canister for emmission control...The older style 3/8 tank sending unit will have a return line provision...So if you wanted to run a factory style vapor separator you'd need an aditional 1/4 inch return line for a 70-71 cuda{from the separator to the sending unit} if going the prebent route....If you don't plan on running the fuel/vapor return simply cap the return on the sending unit.....



Good point, I would recomend installing the third vapor return line to the the sending unit. It's the hot tip to prevent vapor lock. IMO