engine builders, bearing clearance?

Print Thread

Re: engine builders, bearing clearance? [Re: 68roadrunner] #458661 09/04/09 08:14 AM 09/04/09 08:14 AM
Joined: Jan 2003 Posts: 16,928 NC 440Jim I Live Here
440Jim I Live Here Joined: Jan 2003 Posts: 16,928 NC	FWIW, I aim for 0.0030" on the mains (2.75" dia) and 0.0025" on the rods. Guys run them tighter and looser... 1993 Daytona, 5.50 at 130mph (1/8) 1.19 sixty ft (PG). Link to 572 B1 - Part 1

Entire Thread
Subject	Posted By	Posted
engine builders, bearing clearance?	68roadrunner	09/04/09 01:00 AM
Re: engine builders, bearing clearance?	Anonymous	09/04/09 01:58 AM
Re: engine builders, bearing clearance?	68roadrunner	09/04/09 02:16 AM
Re: engine builders, bearing clearance?	Cab_Burge	09/04/09 04:32 AM
Re: engine builders, bearing clearance?	gregsdart	09/04/09 07:23 AM
Re: engine builders, bearing clearance?	440Jim	09/04/09 12:14 PM
Re: engine builders, bearing clearance?	B G Racing	09/04/09 12:23 PM
Re: engine builders, bearing clearance?	68roadrunner	09/05/09 02:39 PM
Re: engine builders, bearing clearance?	440Jim	09/05/09 02:58 PM
Re: engine builders, bearing clearance?	68roadrunner	09/06/09 03:04 PM
Re: engine builders, bearing clearance?	Cab_Burge	09/05/09 03:42 PM
Re: engine builders, bearing clearance?	sixpackbee	09/04/09 12:19 PM

Hop To