|
Re: Engine Dyno programs???
[Re: Moparnut426]
#451771
08/28/09 11:55 AM
08/28/09 11:55 AM
|
Joined: Jan 2003
Posts: 3,505 DFW
mr_340
master
|
master
Joined: Jan 2003
Posts: 3,505
DFW
|
Quote:
WOW,
With my cam, compression, stroke, and heads, they said my max rpm was 9600, and I have a 601hp and 510 ft/lb torque engine. NOT!!!
My engine is a 408 stroker, 300ish CFM Brodix B1BA heads, eddy torquer II intake, 10.8 comp, 850 quick fiel carb. MSD dist, MSD wires, and TTI headers. My cam is a hydro roller, Ill post a cam card.
I put in that data and got 535 HP @ 6000 rpm and 481 lb-ft of torque @ 4460 rpm. It depends on a lot of parameters that you probably don't know. Yeah, the Max RPM is wacked. I ran it on a Pure Stock 340 and got something like 9600 rpm too! It must be based on piston speed or something and not on valvetrain or power peak RPM. I ignore it. It did show your cam is small for max HP. My Pure Stock 340 showed the intake duration should be around 253 degrees @ .050" for max HP, which is pretty close to the BULLET cam I have for it. Seems too big to me.
Floyd Lippencott IV
|
|
|
|
|
|