Quote:

... 3rd pass 6.07@112.8 with 1.32 60ft.

Nice going. Adding those 28 cubic inches did its job. It must feel good to run the new motor too. A successful outing.

Is that cam lift with 1.5 or 1.6 ratio?
I bought a used SB roller cam very similar (but not exact).
278/284, 0.460"/0.450" lobe lift (0.690"/0.675" with 1.5), 113 LSA. I have a flat tappet solid lifter cam in my engine right now( 279/287, 0.433"/0.420" lobe lift, 110 LSA).

1993 Daytona, 5.50 at 130mph (1/8) 1.19 sixty ft (PG). Link to 572 B1 - Part 1